N. 4 vertical cylindrical wine makers 500 hl

Bottom bottom inclined plane connected to the 4 mm thick planking resting on n. 6
Closed boxed stainless steel legs complete with adjustable feet.
Cylindrical plating with butt welded ferrules with automatic TIG atmosphere
inert gas. Plating thickness: first ferrule 3 mm., Remaining ferrules 2 mm.
Decentralized "French-style" conical upper bottom connected to the plating 2.5 mm thick.
N. 1 heat exchange pocket h. 1175 mm., Positioned on the plating, formed by conduits
circumferential so that the liquid in question does not create preferential routes, complete with
1 ”GAS M. inlet sleeves and 1” GAS M. inlet sleeves Exchange surface sqm. 11 / ca.
Test pressure 4 BAR, max operating pressure 2 BAR.
N. 1 heat exchange pocket h. 750 mm., Positioned on the plating, formed by circumferential channels so that the liquid in question does not create preferential routes, complete with
1 ”GAS M. inlet sleeves and 1” GAS M. inlet sleeves Exchange surface sqm. 7 / ca.
Test pressure 4 BAR, max operating pressure 2 BAR.
Insulation of the pockets with high density polyurethane foam (35 kg / m³) with a thickness of 30
mm., coated in AISI 304 stainless steel thickness 0,8 mm., riveted.
Cleaning with pickling and total passivation.

ACCESSORIES:
Upper cover in off-center position DN 420 mm, complete with 1 double vent valve
DN 80 effect all in AISI 316 stainless steel.
Ø ¾ ”nitrogen connection complete with sleeve and cap.
Total drain with stainless steel ball valve machined from solid DIN M DN 80 / DIN F DN 80 on body
valve with drain screw complete with cap and chain.
Partial drain with stainless steel ball valve machined from solid DIN M DN 80 / DIN F DN 80 on body
valve with drain screw complete with cap and chain.
Reassembly tube Ø 85 mm., With fitting DIN 80, connected to the must spreading sprayer
removable, with DIN 80 fitting. Must spreading sprayer controlled by a gear motor 0.75 Kw
fixed speed.
Reassembly pump with stainless steel helical impeller and 2.2 kW electric motor
Internal stainless steel blade coupled with a planetary gearmotor group 5.5 Kw 4P 220/380 Volt,
50 Hz, 3 rpm output.
Electrical control panel with PLC for programming of pumping over, sprayer and
of the extractor in manual and automatic.
Plating thermometer with analog 1/2 "stainless steel sheath -10 / + 50 ° C scale with shank l = 200
mm.
Level dipstick made of polycarbonate tube Ø 24 mm., Stainless steel protection rod,
lower shut-off cock and return to the washing tube.
Washing tube in the central position of the removable tank with DIN DN65 fitting, lowered with
Ø 52 mm tube, DIN F. inlet and blind swivel with chain, washing sphere Ø 65 mm drilled in the
top.
Taste wine in ½ ”stainless steel
Rectangular guillotine door for total discharge of the marc (dim.:530 x 410 mm.) Ad
hydraulic opening at the bottom.
1/2 "probe holder pocket.
Nameplate.
Gangway support in lateral position to the plating.
Lifting eyebolts

The price is for each one