Lot of 10 tanks hl 300 - The price is intended for each

Single-wall cylindrical tank with vertical axis, resting on a reinforced concrete base with a 2% inclined flat bottom made of first choice AISI 304 double-finish 2B (smooth) stainless steel sheets, joined at the ends with butt welds.
The cylindrical body consists of a series of ferrules of adequate thickness, calculated on the basis of the hydrostatic thrust to which the tank is subject.
The roof is of the edged conical type.
Welding will be performed with Tig process to protect with Argon inert gas.
The internal and external welds will undergo a final pickling and passivation treatment, which will ensure the inalterability and stability of the steel.

DIMENSIONS:
- DIAMETER mm. 2,500
- HEIGHT CYLINDRICAL BODY mm. 6,000
- CONICAL ROOF ELEVATION mm. 300
- 2% Plan FUND
- HEIGHT UPPER MANHOLE Ø 400 mm. 350
- TOTAL HEIGHT OF THE TANK mm. 6,700 c.a.
- BOTTOM THICKNESS mm. 3.0 AISI 304
- THICKNESS 1ST SCREW H 1500 mm. 3.0 AISI 304
- THICKNESS 2ND VIROLA H 1500 mm. 2.5 AISI 304
- THICKNESS 3rd AND 4th VIROLA H 1500 mm. 2.0 AISI 304
- ROOF THICKNESS mm. 2.0 AISI 304

ACCESSORIES
- N ° 1 Classic upper manhole Ø 400 in Aisi 304 in central position;
- N ° 1 effetto3 ”double-acting relief valve;
- N ° 2 ball valves DIN 65 connection, for total and partial discharge in 304 stainless steel;
- N ° 2 lifting eyebolts;
- N ° 1 Sampling tap, male ½ ”Gas connection, AISI 304 stainless steel;
- N ° 1 Level rod, complete with upper and lower level door in AISI 304 stainless steel, ? 16 tube in polymethacrylate and adhesive metric rod;
- N ° 1 lower elliptical manhole with internal opening with passage 320x440 in AISI 304;

WITH SELF-SUPPORTING SKIRT OPTION € 10.300,00