NEW BATCH OF 10 VERTICAL STORAGE / VINIFICATION TANKS ON ~ 100 Hl LEGS USEFUL INCLINED FLAT BOTTOM / CONICAL ROOF 

PRE-SEASON LOTS RESERVATIONS UNTIL STOCKS LAST

DIMENSIONS:
External diameter: ~ 2000 mm
Cylindrical part height: ~ 3000 mm
H legs: ~ 650 mm (approximately to be verified in the final balance)
Total tank height: ~ 3750 mm (approximately to be verified in the final balance)

MATERIALS:
Plating: AISI 304 stainless steel. PATENTED SPIRAL CONSTRUCTION
Bottom: AISI 304 stainless steel
Roof: AISI 304 stainless steel

SURFACE FINISH
Tank interior: plating 2b, bottoms 2B
External tank plating: plating flourished, bottoms 2B
These finishes are guaranteed with adhesive plastic film protection before starting any process.

WELDINGS
The welds are performed with automatic and manual T.I.G. with protection of inert gas (Argon) on both sides of the joint, at full penetration, pickled and passivated with external natural cords. Grinding and satin finishing of the internal natural heels. Flattening of the welds of the plating by cold rolling to facilitate cleaning and sanitization.

STRUCTURE
Structure suitable to withstand a capacity of 100 hl with a density of 1.1 kg / dm3.

COMPONENTS
- N ° 4 pyramidal support feet obtained from bent AISI304 sheet metal, equipped with AISI304 adjustable feet with thread and plate Ø150 AISI304 for floor support.
- Upper manhole in AISI 304 diameter 400 mm with cover and double acting valve in PVC
- Stair rest
- Takes stainless steel samples placed on the planking
- Rectangular stainless steel hatch flush with the bottom
- N ° 1 ball valve in stainless steel DN50 DIN / DIN for partial drainage placed at 150 mm from the bottom edge with plating reinforcement and complete with chain cap.
- N ° 1 ball valve in stainless steel DN50 DIN / DIN for total drainage complete with cap and chain.
- Level dipstick in D20 polycarbonate, complete with external stainless steel protection and lower interception needle valve, in stainless steel
- Identification plate

-Optional high-efficiency and energy-saving ashlar-type heat exchange pocket mechanically made with a cavity by spot welding with argon gas protection, 1 "GAS inlet / outlet connections for the carrier fluid, connection for PT100 probe
€ 850.00 + VAT each