NEW LOT OF 10 VERTICAL STORAGE / VINIFICATION TANKS ON ~ 300 Hl LEGS USEFUL BOTTOM / CONICAL ROOF, THE PRICE IS EACH 

PRE-SEASON LOTS WITH RESERVATION UNTIL STOCKS LAST

DIMENSIONS:
External diameter: ~ 2500 mm
Cylindrical part height: ~ 6000 mm
H legs: ~ 650 mm (approximately to be verified in the final balance)
Total tank height: 7400 mm (approximately to be verified in the final balance)

MATERIALS:
Plating: AISI 304 stainless steel. PATENTED SPIRAL CONSTRUCTION
Bottom: AISI 304 stainless steel
Roof: AISI 304 stainless steel

SURFACE FINISH
Tank interior: plating 2b, bottoms 2B
External tank plating: plating 2b, bottoms 2B
These finishes are guaranteed with adhesive plastic film protection before starting any process.

WELDINGS
The welds are performed with automatic and manual T.I.G. with protection of inert gas (Argon) on both sides of the joint, at full penetration, pickled and passivated with external natural cords. Grinding and satin finishing of the internal natural heels. Flattening of the welds of the plating by cold rolling to facilitate cleaning and sanitization.

STRUCTURE
Structure suitable to withstand a capacity of 300 hl with a density of 1.1 kg / dm3.

COMPONENTS
- N ° 5 pyramidal support feet made from bent sheet metal in AISI304, equipped with AISI304 adjustable feet with thread and plate Ø150 AISI304 for floor support.
- Upper manhole in AISI 304 diameter 400 mm with cover and double acting valve in PVC
- Stair rest
- Takes stainless steel samples placed on the planking
- 320x420mm elliptical stainless steel hatch, with inward opening, located 250mm from the bottom edge
- N ° 1 ball valve in stainless steel DN50 DIN / DIN for partial drainage placed at 150 mm from the bottom edge with plating reinforcement and complete with chain cap.
- N ° 1 ball valve in stainless steel DN50 DIN / DIN for total drainage complete with cap and chain.
- Analog thermometer
- Level dipstick in D20 polycarbonate, complete with external stainless steel protection and lower interception needle valve, in stainless steel
- Intentification plate

- Optional High-efficiency and energy-saving ashlar-type heat exchange pocket mechanically made with a cavity by spot welding with argon gas protection, 1 "GAS F inlet / outlet of the carrier fluid, connection for PT100 probe
€ 1100.00 + VAT each