Lot of n.10 vertical cylindrical winemakers hl 300

Bottom bottom inclined plane connected to the 4 mm thick planking resting on n. 6
Closed boxed stainless steel legs complete with adjustable feet.
Cylindrical plating with butt welded ferrules with automatic TIG atmosphere
inert gas. Plating thickness: first ferrule 2,5 mm., Remaining ferrules 2 mm.
Conical upper bottom connected to the 2 mm thick plating.
N. 1 heat exchange pocket h. 1175 mm., Positioned on the plating, formed by conduits
circumferential so that the liquid in question does not create preferential routes, complete with
1 ”GAS M. inlet sleeves and 1” GAS M. inlet sleeves Exchange surface sqm. 10.35 / ca.
Test pressure 4 BAR, max operating pressure 2 BAR.
Insulation of the pocket with high density polyurethane foam (35 kg / m³) with a thickness of 30
mm., coated in AISI 304 stainless steel 1,5 mm thick. welded.
Cleaning with pickling and total passivation.

ACCESSORIES:
Upper cover in central position DN 500 mm, complete with 1 double vent valve
DN 100 effect in AISI 304 stainless steel.
Total drain with stainless steel ball valve machined from solid DIN M DN 80 / DIN F DN 80 on valve body with drain screw complete with cap and chain with drain pan.
Partial drain with stainless steel ball valve machined from solid DIN M DN 80 / DIN F DN 80 on valve body with drain screw complete with cap and chain.
Reassembly hose DN 65 with DIN fitting connected to the removable must spreading sprayer, with
DIN 60 fitting. Centrifugal must spreading sprayer.
Reassembly pump with stainless steel helical impeller and 2.2 kW electric motor
Pump suction and delivery pipe removable by DIN fittings.
Internal stainless steel blade coupled with a planetary gear motor 4 Kw 4P 220/380 Volt,
50 Hz, 3 rpm output.
Electrical control panel with PLC for programming of replacements and extractor in
manual and automatic.
Plating thermometer with analog 1/2 "stainless steel sheath -10 / + 50 ° C scale with shank l = 200
mm.
Taste wine in ½ ”stainless steel
Level dipstick made of polycarbonate tube Ø 24 mm., Stainless steel protection rod,
lower exclusion tap and return to the upper manhole cover.
Rectangular door for total discharge of the marc (dim.:530 x 430 mm.) Opening through
hydraulic power unit located at the bottom.
1/2 "probe holder pocket.
Roof walkway support.
Nameplate.
Lifting eyebolts

LOT ON RESERVATION UNTIL STOCKS LAST.

The price is for each one.